Pride Mobility Colt Twin, Руководство пользователя

Страница: 37 / 48

37
Colt Twin www.pridemobility.com
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
Frame Separation
1. Arrange the front wheel(s) in a straight forward-fac-
ing position.
2. Lower the tiller and tighten the tiller adjustment
knob.
NOTE: The pivoting tiller is equipped with a
mechanism that will lock the front wheels in
place when the tiller is completely lowered and
secured.
3. Grasp and lift up on the frame release lever. See
figure 22.
4. Lift the front section up until the frame hooks
of the front section separate from the rear sec-
tion. See figure 23.
5. Slowly separate the two sections. See figure 23.
ASSEMBLY
1. Position the front and rear sections of your scooter
as shown in figure 23.
2. Use the frame release lever to lift the front section
as you align the frame hooks of the front section
with the lower frame tube of the rear section. See
figure 23.
3. Once the frame hooks are over the lower frame
tube, lower the front section completely. This will
engage the frame lock.
4. Raise the tiller and fully tighten the tiller adjust-
ment knob.
If the scooter is not equipped with battery boxes:
1. Reinstall the batteries to the battery wells.
2. Connect both battery harnesses. See figure 21.
3. Secure the battery tie-down strap.
4. Reinstall the battery shroud.
5. Reinstall the seat and rotate it into place.
If the scooter is equipped with battery boxes:
1. Reinstall the right battery box, then the left bat-
tery box.
NOTE: Always install the right battery box first.
2. Reinstall the seat and rotate it into place.
Figure 22. Frame Release Lever
FRAME
RELEASE
LEVER
Figure 23. Frame Separation
FRAME HOOKS
LOWER FRAME TUBE