40
www.pridemobility.com
Blast/Rev F/Feb03
Trouble Codes
In addition to indicating battery charge, the battery condition meter also provides diagnostic information when the Europa
detects problems with either the electrical system, or the Dynamic DX system itself. These codes are displayed flashing all
lights the number of times given by the trouble code. The table below identifies the individual trouble codes. If you get one of
these codes, contact your authorized Pride provider.
Flash Code Sequence
Diagnosis
Solution
Low Battery Voltage Fault
Check batteries/battery wiring.
High Battery Voltage Fault
Check batteries.
Left Motor (or connection) Fault
Check left motor wiring.
Right Motor (or connection) Fault
Check right motor wiring.
Left or Right Park Brake (or connection) Fault
Check motor/brake wiring.
Controller Fault
See your authorized Pride provider.
Motor Stalled or Joystick OONAPU
Reset the power on/off key.
The symbol means all 6 lights flash on for a period of 0.2 seconds and off for 0.8 seconds.
The symbol means all 6 lights are off for a period of two seconds before flashing sequence repeats.
NOTE: You must turn the controller off and then on again to reset the controller, even if the source of the fault is
removed/corrected.
In the event of a fault, the flashing battery condition meter displays diagnostic indications. Faults are encoded as follows: one
(for a low battery voltage fault) to seven (for a motor stalled or joystick OONAPU) and are displayed by all lights flashing the
number of times prescribed by the fault code. The flash sequence (one to seven) is followed by a long off period (2 seconds).
If more than one fault exists, then the fault having the highest priority is indicated. The controller must be turned off and then
on again even if the source of the fault is removed. If you cannot resolve the problem, contact your authorized Pride provider.
V I I I . O P E R A T I O N
