..\Manuals\RCI-800-MDM rev.C.doc
Page 9 of 15
CONNECT
Time interval, in seconds, the
calling unit stays connected before it terminates
the call. While two units are connected they
continually exchange their data. This is useful
when an immediate confirmation is required
after sending an action to the other unit.
Allowable values
:
5-255 = connection duration in sec.
(note the 5 second minimum)
POWER-UP DIAL
This setting determines if
the unit will initiate a call at power-up. The unit
can be forced to place a call in ‘PAUSE’
seconds after it is first powered up. This is
useful to re-establish proper input and output
settings after a power failure.
Allowable values
:
NO = NO dial at power-up
YES = DIAL in PAUSE seconds after
power-up
TIMEOUT
Time interval, in seconds, to wait
for called unit to answer. If the called unit
does not answer in this time, the call is
considered unsuccessful.
Allowable values
:
10-255 = wait interval in seconds
(note the 10 second minimum)
COM
Select the COM Port to which the
RCI-MDM is connected.
READ RCI
Obtains configuration values that
are stored in the RCI-MDM.
WRITE RCI
Sends values to the RCI-MDM.
SAVE
Allows you to save the configuration to a
text file on your hard drive.
LOAD
Allows you to load a configuration file
from your hard drive.
RESET VALUES
Resets all values to default
settings.
QUIT
Exits the Program.
DISPLAY
Shows application processes, status
and errors that occur.
