Prexiso PR400HV, Руководство пользователя

Страница: 8 / 18

8
• Press to switch to scan mode. The scan angle can be adjusted by
pressing this key. To move the beam to the right or the left, press
and .
AUTOMATIC VERTICAL MODE
• Place the laser in its vertical position (handle pointing upwards).
Use the level and the foot screw to put the laser in its levelling
range if the ground is not even.
• Press . (Vertical) levelling will begin. Once the laser is leveled,
the head will begin rotating.
• In automatic vertical mode, the head can rotate to the left or right around
the X-axis without using slope mode. All other operations are identical to
those in automatic horizontal mode (see above).
SLOPE MODE
• When the laser is in automatic mode, press and hold for at least 3
seconds, then press to switch to slope mode. The
LEDs will now be illuminated.
• The slope is automatically on the X-axis. To use the Y- or Z-axes,
press .
• To exit slope mode, press once more.
• Press and . to tilt the head on the chosen axis.
• If the desired slope exceeds the laser’s capacity, the LED will flash.
Press to switch the laser off.
MANUAL MODE
• Press to switch the laser on.
• Press and hold for at least 3 seconds. The laser will
switch to manual mode. You can now use the slope and scan
functions and change the laser’s rotation speed.
TILT FUNCTION
• The Tilt function is activated in automatic mode by pressing .
The LED will light up and the Tilt function will activate after
10 seconds.