Prexiso PR400HV, Руководство пользователя

Страница: 10 / 18

10
DISPLAY
a. Indicator for detecting accuracy
b. Battery indicator
c. Audio signal indicator
d. Direction indicator “move downward”
e. Centre indicator
f. Direction indicator ”move upward”
-
-
+
+
a
b
c
d
e
f
OPERATION INSTRUCTIONS
1. Inserting/Replacing the batteries
Open Battery compartment and insert two AA batteries in the battery
compartment (AA alkaline batteries are recommended for the detecting
tool.). When inserting batteries, pay attention to the correct polarity
according to the representation on the inside of the battery compartment.
NOTE:
Remove the batteries from the detector when not using it for
extended periods. When storing for extended periods, the batteries can
corrode and discharge themselves.
2. Setting up the detector
Switch on the pulse function of the line laser. Select an operating mode on the line laser
where either only one horizontal or vertical laser plane is generated.
Position the detector in such a manner that the laser beam can reach the reception area
6. Align the detector in such a manner that the laser beam runs laterally through the
reception area (as shown in the figure).