PREVOST X3-45 COACH Скачать руководство пользователя страница 5

Страница: 5 / 294

Foreword

This

Operator's Manual

for the PREVOST X3-

45 coach has been prepared to thoroughly

acquaint you, the driver, with the equipment and

features of the coach in order for you to fully

appreciate and safely enjoy this vehicle. Prevost

is committed to the continuous improvement of

coach quality, reliability, durability and safety.

With innovative features, the X3 series coach was

designed with passenger and driver safety and

comfort in mind.

This manual contains information available at the

time of publication. Because standard and

optional equipment is covered in this manual,

some of the optional equipment described may

not apply to your coach. If in doubt, refer to the

technical documentation package provided with

the coach.

Driver's controls and instruments incorporate

advanced technology for enhanced driving ease

and security. This manual describes the main

features, instruments and controls, and servicing

requirements for both standard and optional

equipment. Read this manual carefully to take

advantage of the coach's advanced features and

to ensure optimum safety and passenger comfort.

Keep this manual in the coach at all times. Make

sure this manual is kept with the coach when

ownership is transferred. Please use the

appropriate card at the end of this manual to

promptly notify Prevost of any change of address

or transfer of ownership. This will ensure we

provide fast and reliable coach service to all

coach operators.

Note:

Illustrations in this manual are used for

reference only and may differ slightly from the

actual vehicle; however, key components

addressed in the manual are represented as

accurately as possible.

DANGER, WARNING

CAUTION

and

NOTE

. are

used throughout this manual to emphasize

important points when necessary:

The service life of the coach depends on the kind

of attention it receives. Pay close attention to the

DANGER, WARNING

CAUTION

and

NOTE

Read the various notices and instructions posted

throughout the coach and attached to equipment.

Since continuous improvement is a primary focus at Prevost,
we reserve the right to make changes anytime, without notice,
and without incurring any obligation.

Before reproducing or copying this manual, in whole or in
part, written consent must be obtained from Prevost.

DANGER

Directs the operator’s attention to unsafe

practices which could result in serious

personal injury or death.

WARNING

Directs the operator’s attention to unsafe

practices which could result in serious

personal injury or severe damage to the

vehicle.

CAUTION

Directs the operator’s attention to unsafe

practices where personal injury is not likely

but damage to vehicle components could

occur.

NOTE

Indicates supplementary information

essential to the proper operation of the

vehicle.

Содержание X3-45 COACH







































































































































































































































































































Результаты поиска

Содержание X3-45 COACH

Отзывы:

Похожие инструкции для X3-45 COACH

Бренды по названию

Популярные бренды

PREVOST X3-45 COACH, Руководство оператора

Результаты поиска

Содержание X3-45 COACH

Отзывы:

Похожие инструкции для X3-45 COACH

Бренды по названию

Популярные бренды