PREVOST X3-45 COACH Скачать руководство пользователя

Страница: 116 / 294

CAUTION

4-54

Controls and Instruments

Windshield Wipers (6)

Turn the lever counterclockwise to activate the

windshield wipers. The first position activates the

wipers intermittently. The second position is the

slow speed and the third position is for high

speed wiping.

STEERING WHEEL CONTROLS

32T

LEFT STEERING WHEEL CONTROLS

23T

RIGHT STEERING WHEEL CONTROLS

THE STEERING WHEEL CONTROLS INCLUDE THE FOLLOWING FUNCTIONS:

1, 8

SHIFT DOWN, SHIFT UP (I-SHIFT TRANSMISSION)

Use these buttons to shift down or shift up manually the transmission range as would do the “-”

& “+” keys on the i-shift gear selector keypad.

SET (CRUISE CONTROL)

For the cruise control operating instructions, refer to “cruise control” paragraph in this chapter.

CANCEL (CRUISE CONTROL)

For the cruise control operating instructions, refer to “cruise control” paragraph in this chapter.

RESUME (CRUISE CONTROL)

For the cruise control operating instructions, refer to “cruise control” paragraph in this chapter.

5, 12

LEFT SUNSHADE, RIGHT SUNSHADE

Press and hold the button to lower the left or right sunshade. Press twice rapidly and hold the

button to raise the left or right sunshade.

ESCAPE/ENTER (DRIVER INFORMATION DISPLAY)

Enter: lift this button briefly.

Escape: press briefly on this button.

UP/DOWN (DRIVER INFORMATION DISPLAY)

To avoid scratching the windshield, do not

operate the wipers when the windshield is

dry. To avoid damaging the wiper motor, free

wiper blades that may be frozen to the

windshield before operating the wipers.

Do not attempt to raise or lower these shades manually. Damage to electric motor or roller

mechanism could result.

CAUTION

Содержание X3-45 COACH







































































































































































































































































































Результаты поиска

Содержание X3-45 COACH

Отзывы:

Похожие инструкции для X3-45 COACH

Бренды по названию

Популярные бренды

PREVOST X3-45 COACH, Руководство оператора

Результаты поиска

Содержание X3-45 COACH

Отзывы:

Похожие инструкции для X3-45 COACH

Бренды по названию

Популярные бренды