PREVOST X3-45 COACH Скачать руководство пользователя страница 158

Страница: 158 / 294

Other Features 5-25

DRIVER CONTROLLED
DIFFERENTIAL LOCK (DCDL)

By actuating the electric switch, the driver can

lock or unlock differential action.
The purpose of the DCDL is to provide

maximum vehicle traction and control on

unfavorable road surfaces. When the DCDL is

actuated, a clutch collar completely locks the

differential case, gearing, and axle shafts

together. This feature maximizes traction to both

wheels. The lock position will also protect

against spinout damage to the differential. The

DCDL should not be actuated when favorable

road conditions exist.

OPERATION TIPS

1. The DCDL can be locked or unlocked if the

vehicle is standing still or moving at a

constant low speed when the wheels are not

spinning, slipping, or losing traction.

2. When the DCDL is locked, operate the

vehicle at low speeds. DCDL will not engage

and will disengage in speed higher than 5

MPH (8 km/h).

3. When the DCDL is locked, the vehicle’s

turning radius will increase. This condition is

called “understeer.” The driver must use

caution, good judgment and drive at low

speeds when operating the vehicle with the

DCDL locked.

4. Always unlock the DCDL as soon as the

need for maximum traction has passed and

the vehicle is traveling on a good road.

5. Do not lock the DCDL when the wheels are

slipping or losing traction, or damage to the

axle can result.

6. Do not lock the DCDL when the vehicle is

traveling down steep grades, or potential

loss of vehicle stability could occur.

LOCKING THE DCDL

When encountering poor road conditions where

maximum traction is needed, follow the

recommended procedures:

1. Without the wheels spinning, slipping or

losing traction, flip the DCDL control switch

to the “LOCK” position while maintaining a

constant vehicle speed.

2. Let up momentarily on the accelerator to

relieve torque on the gearing, allowing the

DCDL to lock.

3. When the DCDL is fully locked, the vehicle

will have an “understeer” condition when

making turns. Proceed cautiously over poor

road conditions.

UNLOCKING THE DCDL

When the vehicle can safely operate and driving

conditions have improved, disengage the DCDL

following the recommended procedures:
1. Flip the control switch to the “UNLOCK”

position, when the vehicle is stopped or

when traveling at low speed while the wheels

are not spinning, slipping or losing traction.

2. Let up momentarily on the accelerator to

relieve torque on the gearing, allowing the

DCDL to unlock.

3. Resume driving at normal speed using good

driving judgment.

KNEELING SYSTEM

This system lowers the front end, enabling

passengers to get on and off the coach without

any difficulty.

To operate, stop the coach, set the transmission

to neutral (N), then push down the rocker switch

located on the dashboard. (Refer to "Controls &

Instruments" chapter). The parking brake will be

applied automatically and a status line pictogram

will appear on the DID to indicate that the front of

the coach is being lowered.
To raise the front of the coach to its normal

height, push up the rocker switch. The front end

will rapidly rise up. The system will release the

parking brake and shift the transmission to the

previously selected range.

NOTE

For further details, consult “

Bendix ABS Operator’s Manual”.

NOTE

The DCDL system is not available on

vehicles equipped with a ZF A-132 drive axle.

NOTE

This coach is equipped with an interlock

system which automatically applies the

parking brake when the kneeling system is

activated.

Содержание X3-45 COACH







































































































































































































































































































Результаты поиска

Содержание X3-45 COACH

Отзывы:

Похожие инструкции для X3-45 COACH

Бренды по названию

Популярные бренды

PREVOST X3-45 COACH, Руководство оператора

Результаты поиска

Содержание X3-45 COACH

Отзывы:

Похожие инструкции для X3-45 COACH

Бренды по названию

Популярные бренды