PreView Sentry ST82 Series, Руководство по эксплуатации, Страница: 15 / 25

Tel: +386 3 4900 800
http://radar-electronics.com
3702008A
Copyright 2016
Page 10
Figure 12. Provided SD-BK90 ( 90° Mounting Bracket)
If mounting to the vehicle using the provided bracket, follow the procedure
outlined below.
1.
Select the appropriate sensor mounting location.
2. The standard mounting configuration is with the small end of the “V”
graphic pointing down, as shown below.
3. Using the provided bracket as a drill template, scribe position marks
through the holes. Drill 1/4” (6 mm) holes centered at the marks.
4. If needed, a 1.5” (40 mm) diameter clearance hole is required for the
sensor connector and mating cable connector.
5. Secure the sensor to the bracket with the four supplied #10-24 UNC
button head screws, washers, and locking nuts or equivalent. Apply a
maximum torque of 22 lb-inch (25 kg-cm) when securing the sensor.
Figure 13. ST-ASB (Adjustable Mounting Bracket)