PRETUL 27044, Руководство пользователя, Страница: 12 / 48

12
Start Up
• Set the chainsaw onto a leveled ground where the bar
and change make no contact with the ground or any
other object.
• Firmly hold the front handle with your left hand, set the
right foot onto the rear handle base (
A
).
• Pull the chain brake backwards to double check it is in
the functioning position ( see page 8).
• If the chain starts while the brake is
activated the chainsaw may be seriously damaged.
• Set the switch into the ON position ( B ).
• Press completely and release the starter choke 6 times
( C ).
• Pull the choke lever all the way out (
D
).
• Pull the jack-line ( E ) until the motor seems to start, but
no more than 3 times if the environment temperature is
higher than 50 °F. If the temperature is lower, pull the
jack-line until the motor starts.
• EPush the choke lever to the bottom ( F ).
• Pull the jack-line back (
E
) until the engine starts.
• Once the motor starts leave it running 30 seconds in
that position.
• Press and release the throttle trigger to run the motor
idle (
G
).
• The chainsaw is now ready to cut. Hold it by both
handles in the right position (see page 5) and lift it to start
working.
Motor Start Up
CAUTION
B D
F
C
C
G
x6
A
D
ENGLISH