PRETUL 24035, Руководство пользователя

Страница: 20 / 24

• Carbon Brushes should be periodically checked and when worn, replaced
always in a Authorized Service Center.
• After replacing the carbon brushes request to inspect if the new carbon
brushes can move freely in the carbon housing. Also request to run the tool 5
minutes to make even the contact with the carbon brushes and the commuter.
• Use only original spare carbons specifically designed with
the hardness and resistance adequate for each type of motor. Carbons that are
out of specification could damage the motor.
• Both carbons should be changed simultaneously.
Neatly store the tool in a dry place and protected from dust and water .
Storage
8
Use only spare parts and accessories recommended by the manufacturer. In
the event the tool is not working repairs should be carried in a
Authorized Service Center.
Maintenance
Repairs
• Disconnect the plug from the power outlet before cleaning.
• Never use water or other type of liquids. Use only a brush.
• Clean after each use with compressed air or a brush. Pay special attention to
the ventilation slots.
• Double-check the entire tool`s components are properly fixed.
• The housing shall not be cracked or damaged.
• Double-check the power cable is not cut or peeled.
Carbon brush replacement
ENGLISH