Pretorian EnvirON, Инструкция по эксплуатации

Страница: 10 / 12

The following table lists some common problems. In addition, there are a series of informative
videos on how to set up the EnvirON product range on Pretorian Technologies’ website. Please use
the following QR code, or navigate to the EnvirON Remote product page.
If, once you have been through this table and reviewed the videos, you
still experience difficulties, please contact your local distributor or
Pretorian Technologies directly.
Troubleshooting
Symptom Possible Cause
• No power to EnvirON
Remote.
• Touch pads do not respond
when touched.
• Scan switch (in socket 1)
doesn’t do anything.
• Nothing happens when I
press a touch pad.
• Battery flat.
• Battery flat.
• Unit gone into power saving
mode.
• Unit is in single-switch
scanning mode.
• Touch pad not paired with a
receiver.
• Touch pad set to the wrong
Function.
Remedy
• Plug wall adapter into unit and ensure
the charging LED lights.
• Recharge battery
• Wake unit up by pressing any button on
rear or any switch. Also review power
saving settings to ensure they are
appropriate to the user.
• Change to two-switch scanning mode.
• Pair the touch pad with the required
receiver.
• Set the touch pad to the correct
Function.