Prestigio Avanti 1592W, Руководство пользователя

Страница: 40 / 251

39 PRESTIGIO AVANTI 1592W
ENG
Battery Pack / AC Adapter
Primary Battery Pack
Li-ion 6-Cell pack, 10.8V x 4400 mAH
Feature
Low battery state with low battery warning beep
Uniwill SmartPower II Power Management
Smart Battery Compliant; low battery warning beep
Long Battery Life Mode and Silent Mode
Adapter AC-Input /DC-Output
Autosensing AC-in 100~240V, DC-out 20V, 90W
BIOS
PnP Function
Phoenix PnP BIOS
Self Test
Power On Self Test
Auto Detection
DRAM auto-detection, auto-sizing
L2 Cache auto-detection
Hard disk type auto-detection
Power Management
APM 1.2 (Advanced Power Management) &
ACPI 2.0 (Advanced Configuration Power Interface)
Security
Two Level Password Protections
Other Features
32bit access, Ultra DMA, PIO5 Mode support
Multi-boot capability
O/S
Compatible with Microsoft Windows XP / MCE Home Edi-
tion
Physical Specification
Dimension
360 (W) x 269 (D) x 25-37.1 (H) mm
Weight
6.8 lbs / 3.1 KG (with 15.4”LCD, DVD-ROM Drive, and 6-cell
battery pack)
Environmental Limits
Operating Temperature: 5 to 35oC (41 to 95oF)
Operating Humidity: 20 to 80 percent RH (5 to 35oC)
Storage Temperature: -15 to 50oC (-5 to 122oF)
AGENCY REGULATORY NOTICES
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by the Manufacture may void the user’s authority to operate the equipment.