Prestigio Avanti 1592W, Руководство пользователя

Страница: 37 / 251

36 PRESTIGIO AVANTI 1592W
ENG
· Make sure that your RJ-45 cable meets the 100/1000Base-TX requirements.
· Make sure the Ethernet cable is connected to the hub? socket that supports 100/1000Base-TX mode. The hub
may have both 100Base-TX and 1000Base-T sockets.
PC Card / PCMCIA Problems
Note: Some system may not have the PC Card Slot option.
PC Cards do not function-
·
Make sure you have properly installed the driver for the card.
· Consult the card’s manual or contact the vendor for trouble-shooting.
The PC card cannot be recognized -
·
Windows NT4.0 does not support PCMCIA (PC Card) function. You may need an external program for this.
· Make sure the card is fully inserted; the outer end of the card should be even with the edge of the computer.
· Remove and insert the PC card again.
· Make sure there is no IRQ conflict with the card. See Windows on-line help for solving IRQ conflicts.
· Reboot the computer and see if the problem persists.
· The card may be defective. Try the card on another system, if possible.
Windows crashes or freezes when you remove the PC card-
·
Make sure you have <Stop> the PC card before removing it. Double-click the Safely Remove Hardware icon at
the lower right corner of the task bar and select the card you wish to stop. When you click <Close>, in few
seconds Windows will prompt you to remove the card.
Performance Problems
The computer becomes hot -
·
In a 35oC environment, the certain areas of the computer’s back case are expected to reach 50 degrees.
· Make sure the air vents are not blocked.
· If the fan does not seem to be working at high temperature (50 degrees Celsius and up), contact the service
center.
· Certain programs that are processor-intensive may increase the computer temperature to a degree where the
computer automatically slows down its CPU clock to protect itself from thermal damage.
The program appears stopped or runs very slowly -
·
Press CTRL+ALT+DEL to see if an application is still responding.
· Restart the computer.
· This may be normal for Windows when it is processing other CPU-intensive programs in the background or
when the system is accessing slow-speed devices such the floppy disk drive.
· You may be running too many applications. Try to close some applications or increase system memory for higher
performance.
· The processor may have been overheated due to the system’s inability to regulate its internal heat. Make sure the
computer’s ventilation grills are not blocked.