Prestigio Avanti 1592W, Руководство пользователя

Страница: 30 / 251

29 PRESTIGIO AVANTI 1592W
ENG
5. If you need to remove an old DIMM from the socket, press out on the latches located on both edges of the socket at
the same time. The DIMM should pop up to an angle of 30 degree (see diagram below). Pull the DIMM module out of the
memory socket. Store away the DIMM for the future use.
6. Install the new DIMM module into the memory socket. The DIMM will only fit in one orientation. Insert the DIMM at an
angle of approximately 30 degrees into the empty memory socket. Then press it firmly so that the contact edge is driven
into the receiving socket.
7. Pivot the DIMM until the latches on both sides of the socket snap into place.
Note: Notice the notch on the DIMM. The notches should fit nicely with the socket.
8. Put the System Device Cover back and tighten 9 Screw Ds.
Congratulations! You have just completed the memory upgrade. When you boot up the computer, you should expect to
see an increase in DRAM capacity.
Note: Your computer has been tested with a wide range of DIMM on the market. However, not all
memory modules are compatible. Check with your system vendor for a list of compatible DIMM
for your computer.