APS901TM_RevB_12/20
7
Detailed Descriptions:
Setup Op�ons
Bank 1: Add / Remove Remote Controls
See page 15 for Programming Instruc�on.
To Auto Program a remote control:
1. Turn the igni�on key to ON.
2. Press and release the valet bu�on three (3) �mes.
3. The system will beep one (1) �me, indica�ng you have accessed Bank 1, Remote Programming.
4. Press the Start bu�on of each remote control you wish to program. (All channels of the remote control will be
programmed.) The system will beep one (1) �me when each remote control is added.
5. Turn the igni�on key to OFF to exit programming mode, or cycle the igni�on key OFF/ON to advance to the next
Feature Bank.
To delete a remote control:
This system will store a
maximum of four (4) remote controls
in the memory. Addi�onal programmed remote controls
will delete the oldest-programmed remote control.
Deleting All Remotes:
1. Perform steps 1-3 above.
2. Press and hold the Valet bu�on for five (5) seconds.
3. The system will sound one (1) long beep. This indicates all remotes have been deleted from memory.
Notes:
•
The system will store in the memory a
maximum of four (4) remote controls
. Addi�onal programmed
remote controls will delete the oldest-programmed remote control.
•
During normal opera�on, the
Programmed Transmitter Notification (PTN) function
indicates how many
remote controls are programmed by flashing the LED a certain number of �mes when the vehicle igni�on is
turned on.
Remote programming is located in Feature Bank 1. This system will Auto Program basic func�ons of the remote with one
(1) bu�on press. Basic func�ons are channels 1-3, Lock, Unlock, and Trunk / Start.
CH
.
1 Auto Program / Start
Feature Bank 1
Descrip
�
on
Press Start bu
�
on on remote
