Prest-O-Lite 380, Инструкция по эксплуатации

Страница: 11 / 44

11
1.1 GeNeRAl
The Prest-O-Lite ® 380 is a compact, completely self-contained
plasma Cutter. As shipped, the system is fully assembled
and ready to cut after being connected to input power
and a source of prefiltered compressed air (90-150 psi). The
Prest-O-Lite
® 380 system uses the PT-31XL torch to deliver
cutting power for cutting materials up to 3/8 inch thick or
for severing up to 1/2 inch thick.
Do not use any torch with this power source other than
the Prest-O-lite brand PT-31xl torch. Serious injury may
occur if used with any other torch.
1.2 SCOPe
The purpose of this manual is to provide the operator with
all the information required to install and operate the Prest-
O-Lite
®
380 Plasma™ Cutter. Technical reference material is
also provided to assist in troubleshooting the Cutter.
1.3 SYSTem AVAIlABle
Prest-O-Lite®380 Plasma Cutter ....................................................................................................................... P/N 0558006057
includes: Console with Regulator and Work Cable, PT-31XL Torch, 15 ft. (4.6m) Torch Cable and Spare Parts Kit
SeCTION 1 DeSCRIPTION
The patented PT-31XL is a manual torch with a 75
°
head
designed for use with several plasma arc cutting packages
using clean, dry air as the plasma gas. The torch service line
is 15 ft. (4.6m) long and is rated at 100% duty cycle for any
output level of the Prest-O-Lite
®
380.
Optional Torch Guide Kit (0558003258) permits cutting accurate circles from 1.8 inches to 41.3 inches (45mm to
1050mm) in diameter with a manual torch. The attachment includes a head and radius bar assembly, center-point / adap-
tor, and dual swivel castor assembly. Cuts can be made inside or outside the circle. The torch head is always held vertical
during the cutting operation. The attachment is also handy for maintaining a constant standoff in other types of cutting.