51
4 Controls
4.8
Master Section
StudioLive™ 32.4.2AI
Owner’s Manual
4.7.1
Creating a Mute Group (StudioLive 32.4.2AI only)
Creating a mute group is quick and easy. In this example, we will be
creating a mute group for Channels 1-10, using Mute Group 1.
1. Mute Channels 1-10.
2. Press and hold the Mute Group 1 button. It will flash for one second indicating that
it is storing the group. When the group has been stored, it will illuminate.
4.8
Master Section
The Master section of the StudioLive controls Aux Inputs A
and B, the Talkback controls, and the 2 Track Input.
4.8.1
Aux Inputs A and B
The StudioLive features an internal effects processor that allows you to load
two different effects at the same time. You also can patch processed return
signals from an external effects processor using Aux Inputs A and B.
Power User Tip:
Aux Inputs A and B can also be used as stereo line-input channels
for line-level devices like keyboards, synths, and amp modelers. Because Aux
Inputs A and B can be processed by the Fat Channel and sent to any aux mix,
they should be used as extra input channels whenever you need them.
Aux Input Select Button. Enables Fat Channel Viewing.
As previously described in
Section 4.1.1
, the Select button routes its channel
through the Fat Channel, allowing you to adjust panning and to enable output
assignments. This will also open the Channel Info page for the selected aux input.
Aux Input Level Control. Controls the Signal Level of the Aux Input.
This knob controls the overall level of the aux-input signal.
Save
Undo
