PRESONUS Firestudio Project, Руководство пользователя

Страница: 30 / 41

CONTROLS AND CONNECTIONS
27
| PreSonus 2009
Master Output Section
 Master Output Fader Changes the Selected Output’s Audio Level
Move the Master Fader up and down to increase and decrease the level of
the selected output’s audio.
The amount of boost or attenuation, measured in decibels, is displayed below
the Channel Fader. The range is from –
∞ to 0 dB.
Two virtual LED meters to the right of the Master Fader display the
prefader levels of the audio signal.
The peak value in dBFS of the channel’s audio is displayed directly above
the Master Output’s virtual LED meter.
NOTE:
If the peak values display “CLIP,” then your mixer channels and/or
your DAW playback levels should be reduced. The clip indicators clear when
the mouse pointer hovers over them.

Master Mute and Solo Clear
Clears All Active Channel Mutes or Solos
The Master Mute and Solo Clear buttons are only active when a channel’s
mute or solo button is active.
Mixer Section

Channel Pan Sliders
Moves the Channel’s Audio Left/Right in the Stereo Field
Double-clicking the slider returns the pan to center.
 Link Buttons Links the Adjacent Channels as a Stereo Pair
When channels are linked, changing either channel’s level changes both
channels’ levels, and the signals are panned hard left and right.

Channel Faders
Changes the Channel’s Audio Level
Move the Channel fader up and down to increase and decrease the channel’s
audio level.
The amount of boost or attenuation, measured in decibels, is displayed below
the Channel Fader. The range is from –
∞ to +6 dB.
A virtual LED meter to the right of each fader displays the postfader level of
the channel’s audio.
The peak value, in dBFS, of the channel’s audio level is displayed directly
above each channel’s virtual LED meter.