President's Choice PC25774, Инструкция по эксплуатации

Страница: 20 / 44

12
E
F
A
13
B
14
B
pre-installed bolt (10)
STEP 8
a) Place the
12
body assembly
on the top of cart assembly.
Make certain the pre-drilled
holes on the right side of body
assembly are aligned properly
with the holes on the right side
of cart assembly.
b) Insert
A
one bolt with
F
one
spring washer and
E
one flat
washer into each hole on the
right side of body assembly.
c) Tighten all bolts by hand
until secure.
d) Repeat the procedure for
the left side of body assembly.
e) Go back to tighten all the bolts using the screwdriver provided.
STEP 9
a) Loosen the five pre-installed bolts on the right side of body assembly,
and allow ¼ bolt length to extend from the body assembly.
b) Align the large holes on the
14
right side shelf with the bolts
extending from the body assembly, and push down
on the right side shelf
until the shelf locks
into place. Tighten bolts
by hand until secure.
c) Align the hole on the
14
right side shelf with
the hole on the right
side of the control panel,
insert
B
one bolt into the
hole and tighten the
bolt by hand until secure.
d) Repeat the procedure for
the
13
left side shelf.
e) Go back to tighten all bolts
using the screwdriver provided.
20