9
7) MODE ~ PA ~ •VOX
MODE
(short press)
This switch allows selecting the modulation mode AM, LSB
or USB; Your modulation mode has to correspond to the
one of your correspondent.
Amplitude Modulation / AM:
communication on a field with
relief and obstacles at middle distance (the most used).
Upper and Lower Side Band / USB-LSB:
used for long dis-
tance communications (according to the propagation
conditions).
Press
MODE
key (
7
) to alternate between :
PA (PUBLIC ADDRESS)
(long press)
Long press
PA
key (
7
) to alternate between
CB
and
PA
mode.
PA
MODE.
“PA”
is displayed. An external loud speaker can
be connected to the unit by the PA jack plug located on
the back panel PA.SP. (
D
).
The CB messages received or transmitted into the micro-
phone will be directed towards the
PA
speaker and be
amplified.
When
PTT
switch (
13
) is pressed,
“on”
is displayed, message is
{
PA LEVEL
}, Meter numbers indicate signal level.
To adjust
PA
level, press and keep
PTT
switch (
13
), turn the
CH
rotary knob (
6
) and use the meter numbers indicators.
Message {
PA LEVEL
} blinks.
ROGER
,
SCAN
,
MEM
,
VOX
are not allowed in
PA
mode. If the
user set
on
PA
mode while
SCAN
function, instant channel
9/19
mode or
WEATHER
mode, these are canceled.
•VOX
(•F/MEM + short press)
The
VOX
function allows transmitting by speaking into the
original microphone (or in the optional vox microphone)
without pressing the
PTT
switch (
13
). The use of an optional
vox microphone connected to the rear panel of the trans-
ceiver (
E
) disables the original microphone.
Press one time
•F/MEM
key (
11
) and short press •
VOX
key
(
7
) in order to activate the
VOX
function.
“VOX”
appears
on the display. Repeat the key combination to disable the
function.
“VOX”
disappears.
•VOX SET
(•F/MEM + long press)
Press one time the
•F/MEM
key (
11
) and press during 1 second
•
VOX
key (
7
) in order to activate the function
VOX SETTING
.
“VOX”
blinks. Three adjustments are possible: Sensitivity /
Anti-vox level / Vox delay time . Press shortly •
VOX
(
7
)
in order to go to the following adjustment (looping , , ).
The message shows the type of adjustment followed by its
level {
SET-L1
}, {
SET-A1
}, {
SET-T1
}.
-
Sensitivity
: allows the adjustment of the microphone
(original one or optional vox) for an optimum transmission
quality. Adjustable level from 1 (high level) to 9 (low level)
by using
channel
selector
switches (
6
). corresponds to
the Sensitivity
L
evel.
-
Anti-Vox
: allows disabling the transmission generated by
the surrounding noise. The level is adjustable from 0 (Off)
to 9 (low level) by using
channel selector
switches (
6
).
corresponds to
A
nti-vox Level.
-
Delay
time
: allows avoiding the sudden cut of the trans-
mission by adding a delay at the end of speaking. The level
is adjustable from 1 (short delay) to 9 (long delay) by using
channel selector
switches (
6
). corresponds to Delay
T
ime.
English
