manualshive.com logo in svg

PreSens pH-10 mini, Инструкция по эксплуатации, Страница: 7 / 38

Поделиться
Скачать
PreSens pH-10 mini Скачать руководство пользователя страница 7

Safety Guidelines 

 

 

5

We explicitly draw your attention to the fact that any damage of the manufactural seal will render all 
guarantee warranties invalid.  

Any internal operations on the unit must be carried out by personnel explicitly authorized by PreSens, 
and under antistatic conditions. 

 

The pH-10 mini may only be operated by qualified personnel. 

This measuring instrument was developed for use in the laboratory. Thus, we must assume that, as a 
result of their professional training and experience, the operators will know the necessary safety 
precautions to take when handling chemicals. 

 

Keep the pH-10 mini, power supply and optical sensors out of the reach of children! 

 

As the manufacturer of the pH-10 mini, we only consider ourselves responsible for safety and 
performance of the device if 

•

  the device is strictly used according to the instruction manual and the safety guidelines 

•

  the electrical installation of the respective room corresponds to the DIN IEC/VDE standards. 

 

The pH-10 mini and the sensors must not be used in vivo examinations on humans! 

 

The pH-10 mini and the sensors must not be used for human-diagnostic or therapeutical purposes! 

Содержание pH-10 mini







































Отзывы:

Нет отзывов