General Instructions
20
Calibration
Here you can enter the calibration data of your pH sensors – either individual sets of
calibration data for each sensor or the same set of calibration data for all channels. You can
find the detailed description of calibration of pH sensors in chapter 6 “Calibration”.
Exit:
Here you can close the software
4.3.2 Status
Bar
All important numerical details of the channel chosen in the “Channel” section are displayed
here.
The raw values amplitude and phase can be hidden by click “hide raw value”. The color of
the button near Phase, Amplitude and ambient light indicates whether the readings are within
the limits. Whenever one of the buttons is red, you will get an error message. Usually the
error is caused by the connection to the sensor.
4.3.3 Control
section
Measurement and logging
Here you can start a measurement, either each channel individually (click at the respective
“Start” button) or all channels simultaneously by clicking on “Start all”.
After starting a measurement you can select the measuring parameters temperature of
measurement and interval.