Maintenance and Inspection
Read the section title SAFETY.
SERVICE AND REPAIRES
All quality tools will eventually require servicing or replacement of parts due
to wear from normal use. It is recommended that these operations should be
performed by a professional technician.
NOTE:
The information contained in this Manual is designed to assist you in
the safe maintenance of the nailer.Some illustrations in this Manual may show
details or attachments that are different from those on your nailer.
WARNING:
Disconnect air hose and remove nails from nailer when:
●
Doing maintenance and inspection
●
Cleaning a jam
Inspecting the magazine
1.
DISCONNECT AIR HOSE.
2.
Clean the magazine. Remove dust which may have accumulated in
the magazine.
3.
Lubricate the nailer rail with nailer lubricant.
Clearing a jam
Remove a jammed nail in the following order:
1.
DISCONNECT AIR HOSE.
2.
Remove all nails.
3.
Remove the jammed nail with a slotted head screwdriver.
4.
In case of frequent jams, contact an authorized service center.
A qualified person should perform repair and maintenance
Warranty will be honored, only if:
1. Clean, dry, regulated compressed air has been used at
air pressure not exceeding the maximum indicated on
the tool casting;
2. No evidence of abuse, abnormal conditions, accident,
neglect, misuse or improper modifications or stroage
of the prodcut exists;
3. No deviations from following recommended operating
instructions, specifications, and maintenance schedules
exist.(Read Operator Manual for use, specifications and
maintenance instructions).
(April. 2016)
GENERAL WARRANTY CONDITIONS
Содержание 8016/429
Страница 1: ......
