4. DO NOT OPERATE THE TOOL NEAR A FLAMMABLE SUBSTANCE.
Never operate the tool near a flammable substance
(e.g., thinner, gasoline, etc). Volatile fumes from these substances could be
drawn into the compressor and compressed together with the air and this
could result in an explosion.
5. DO NOT USE A WRONG FITTING.
The connector on the tool must not hold pressure when air supply is
disconnected. If a wrong fitting is used, the tool can remain charged with air
after disconnecting and thus will be able to drive a fastener even after the
air line is disconnected, possibly causing injury.
6. DO NOT TOUCH THE TRIGGER UNLESS YOUR INTEND TO
DRIVER A FASTENER.
Whenever the air supply is connected to the tool, never touch the trigger
unless you intend to drive a fastener into the work. It is dangerous to walk
around carrying the tool with the trigger pulled, and this and similar actions
should be avoided.
7. NEVER POINT THE DISCHARGE OUTLET TOWARD YOURSELF
AND PERSONNEL.
If the discharge outlet is pointed toward people, serious accidents may be
caused when misfiring. Be sure the discharge outlet is not pointed toward
people when connectingand disconnecting the hose. Loading and not loading
the fasteners or similar operations.
8. KEEP HANDS AND BODY AWAY FROM THE DISCHARGE OUTLET
When loading and using the tool, never place a hand or any part of body in
fastener discharge area of the tool. It is very dangerous to hit the hands or
body by mistake.
Staple Specification
WARNING:
Be sure to use only the genuine nails recommended for the
this nailer. The use of any other nails can result in tool malfunction, leading
to serious injuries.
Содержание 8016/429
Страница 1: ......
