CTM-MS2
Page 6
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installing the Wall Plate
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the
CTM-MS2 wall plate indicates which edge is the
top.
Visual Centering Diamond
The Visual Centering Diamond will guide you in
determing the screen placement on the wall.
Mounting Safety
Two people are recommended to install the wall
plate.
You must secure the wall plate to two (2) wall
studs with six (6) lag bolts (3 lag bolts for each
stud found).
➊
Use a stud finder to determine the exact center of
wall studs in the vicinity of the wall plate.
➋
Use a pencil to mark the exact center of each of the
wall studs.
Step 1
Step 2
Step 3
Two people are recommended for this step; one
person to level the wall plate and another person
to mark the wall stud location.
➊
Place the wall plate against the wall in the desired
viewing location.
➋
Adjust the wall plate to align the mount slots in the
wall plate with the center of the wall studs.
➌
Level the wall plate.
➍
Use a pencil to mark the upper right mounting
location along the center of the wall stud.
Drill a “pilot hole” in the center of the upper right mark
using a ¼″ drill bit and power drill.
Only use a ¼˝ drill bit when drilling pilot holes.
X
X
X
X
X
X
