www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Installation Guide
LMVSP
X
X
1
3
2
4
Wood Stud Installation
1)
Use a stud finder to determine the wall studs in the
vicinity of the mount.
2) Use a pencil to mark each of the wall studs.
Use a pencil to mark the upper right mounting location of the wall
stud.
Drill a “pilot hole” using a M6 or 1/4” drill bit on the stud that was
marked on the upper right.
1) Place the mount against the wall and align it with the pilot hole.
2) Insert one (1) 5/16” x 3” lag bolt and one (1) 5/16” washer into
the upper right pilot hole.
3) Use a socket wrench and a 13mm or 1/2” socket to tighten the
lag bolt.
X
X
Page 3
