www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Installation Guide
LMVSP
The locking safety screws keep the flat-panel from being
accidently dislodged from the LMVSP.
1)
Locate the pre-installed security locking safety screw at the bottom
of each of the mounting brackets.
2)
Use the M5 Allen driver (supplied) to tighten the locking safety
screw.
Pre-installed
Locking Safety Screw
(1 per Bracket)
Locking Safety Screw Installation
Post-Installation Adjustments
The LMVSP has a set of post-installation adjustments on each mounting
bracket (Figure 1).
Use the M5 Allen Driver (supplied) to fine-tune adjust.
Make sure the the locking safety screws are loosened before making
adjustments.
Figure 1
Note: Screws have a limited travel adjustment.
Do not overtighten or over adjust the screw to avoid damage to
threaded holes.
See Note
See Note
See Note
Do not overtighten the locking safety screws.
Note: Tighten screw to surface, then tighten 1/4” turn
Page 10
