www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Installation Guide
LMVSP
1)
Push evenly in the front of the LMVSP to release the single latch
spring lock(Figure 1).
Figure 3
Figure 1
Figure 2
Single Latch
Spring Lock
Servicing
Maintenance
1)
Slowly pull the front of the LMVSP to extend the scissor arms
(Figure 2).
2)
Loosen the locking safety screws on both mounting brackets.
3)
Tilt up the bottom of the flat-panel, then set their kickstands
against the bottom tubing of the mount (Figures 2 & 3).
You can now reach behind the flat-panel for maintenance and
servicing or replacement. After servicing, make sure the spring
lock is locked again in the mount’s closed position.
Note: Shown without adapters for clarity.
CL
CL
Page 14
