GB-VESA42
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 7
Step 3
Step 4
1) Place the wall plate against the wall and align it with
the pilot hole.
2) Insert one (1)
5
/
16
″ x 3″ lag bolt and one (1)
5
/
16
″ washer
into the upper right mounting hole and tighten using a
socket wrench and ½″ socket.
Do not overtighten the lag bolt.
Installing the Wall Plate (cont’d)
Drill a “pilot hole” in the center of the upper right mark
using a ¼″ drill bit and power drill.
Only use a ¼″ drill bit when drilling the pilot holes.
Step 5
Step 6
1) Level the wall plate.
2) Use a pencil to mark the remaining three (3) mounting
locations along the center of each wall stud.
Two people are recommended for this step; one
person to level the wall plate and another person
to drill the pilot holes.
Drill a “pilot hole” in the center of each of the marks with
a power drill and a ¼″ drill bit.
Only use ¼″ drill bit when drilling the pilot holes.