GB-VESA42
Page 10
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Mounting Hardware (cont’d)
Universal Spacer Installation
Premier Mounts’ Universal Spacers allow you to
attach the mounting bracket to flat panels which have
recessed or uneven mount points. Each Universal
Spacer adds ¼˝ to the distance between the mounting
bracket and your flat panel.
The Universal Spacers must be stacked and
oriented as shown.
The Universal Spacers must only be installed
between the mounting bracket and your flat panel.
The Universal Spacers will fit M4, M5, M6 and M8
screw sizes.
Proceed to the “Attaching the Mounting Bracket to
the Flat Panel” section.
1˝
¼˝
Attaching the Mounting Bracket to the Flat Panel
This section presumes that you have read and understood these
sections:
●
Selecting the Proper Mounting Hardware
●
Universal Spacer Installation
1) Place your flat panel screen-side down on a soft, flat surface.
2) Identify the number and location of the thread inserts on the back
of your flat panel.
3) Align the holes on each mounting bracket with the thread inserts
on the back of your flat panel.
4) Secure the mounting bracket to your flat panel by inserting a
minimum of two (4) screws.
Do not overtighten the mounting hardware.
Proceed to the
“Attatching the Flat Panel to Back Plate”
section.
Attaching the Flat Panel to the Wall Plate
This section requires two people.
Do not release your flat panel until you are certain that the slots on the upper part of the mounting plate are
securely hooked and the bottom slots are resting on in the upper hinge pins of the wall panel.
1) Raise the flat panel past the top and bottom hinge pins on
the wall plate.
2) Slide the flat panel down slowly, keeping it close to the wall.
3) Hook the upper mounting slots of the mounting bracket onto
the hinge pins of the wall plate so that the top is secure and
the bottom slots of the mounting bracket are resting on the
lower hinge pins of the wall plate.
Make sure the brackets are safely resting on the hinge
pins before letting go of the display.
Proceed to the
“Securing the GB-VESA42 Mount”
section.