background image

 

IMPORTANT 

INSTALLER AND USERS PLEASE NOTE: 

These instructions should be read carefully and left with the user of the product for 
future  reference.  This  product  is  only  suitable  for  well  insulated  spaces  or 
occasional use. 
 

BEFORE USE 

You  must  inspect  the  appliance  including  its  cable  and  plug  for  any  signs  of 
damage.  If  the  product  is  damaged,  DO  NOT  use  it,  and  contact  your  supplier 
immediately. 
 

PRODUCT SAFETY 

  This  appliance  can  be  used  by  children  aged  from  8  years  and  above  and 

persons  with  reduced  physical,  sensory  or  mental  capabilities  or  lack  of 
experience  and  knowledge  if  they  have  been  given  supervision  or  instruction 
concerning  use  of  the  appliance  in  a  safe  way  and  understand  the  hazards 
involved. 

  In order to avoid a hazard due to inadvertent resetting of the  thermal cut-out, 

this appliance must not be supplied through an external switching device, such 
as a timer, or connected to a circuit that is regularly switched on/off by the utility. 

  The heater must be installed at least 1.8m above the floor. 

  Children shall not play with the appliance. 

  Cleaning  and  user  maintenance  shall  not  be  made  by  children  without 

supervision. 

  Do not cover the heater. 

  For indoor use only. 

  Do not use in bathrooms, 

  Do not use in wet or damp locations. 

  Do not place the mains lead beneath a carpet or rug. 

  Do not position heater immediately below a socket outlet. 

  Before using please ensure the intended socket / electrical outlet matches the 

recommended rating issued to the heater. 

  Do not use the heater in locations where paint, petrol or other flammable liquids 

are used or stored. 

  Please ensure heater is switched off and unplugged when not in use 

  Please  do  not  use  an  extension  lead  with  this  heater  as  this  could  cause  the 

product to overheat. 

  If the fan stops running, the appliance should be turned off immediately 

  Do not use the heater for other than its intended use. 

  Do no insert any object into the heater through the grilles. This may damage the 

heater or result in overheating or electric shock. 

  There must be a minimum 300mm safe area above and around the sides of the 

heater, clear of obstructions 

  Do not obstruct the air intakes of this heater. 

Содержание EH1896










Отзывы: