MINI PAK’R V3
- MM2I2IN115 / MM2I2IN230
Page 16 of 21
4. Unscrew thumbscrew to
loosen the blade
5. The slit performance can be
improved by repositioning the
blade, so that the film is again
cut by a sharp section of the
blade. This is achieved by a
number of options:
a) Reposition blade further
into the manifold
b) Flip the blade on the short
edge
c) Exchange blade if cut
edge is fully used
6. (Re-)position the blade
7. Tighten the thumb screw