MINI PAK’R V3
- MM2I2IN115 / MM2I2IN230
Page 12 of 21
Basic operation
Set air fill level
Set number of cushions
to produce
Green LED
•
Blinks while warming up
•
Solid when ready
Start button
•
Warm up the machine
•
Start production of Air
Cushions
Display
Set seal temperature
Red LED
Stop button
•
Stop production
•
Reset MINI PAK’R
Industrial after error is
corrected
Initially, the display will show “
SLP
” (Sleep). Once film is loaded, the machine will detect the roll.
The
green LED
on the
Start Button
will begin flashing. A flashing
green LED
indicates that the
machine is warming to the correct seal temperature. The Control Panel will display seal
temperature while adjusting.
When the correct temperature is reached, the
green LED
will remain solid green. The display
will show “
RDY
” (Ready). The machine is ready for production. Press the
Start Button
to begin
making Air Cushions.
Start production
When the
green LED
remains steady green, and the
Display reads “
RDY
” (Ready), press and release the
Start Button
again to begin production. The Air
Pump will force air into the film, and after a few
seconds the Drive Motor will advance the inflated Air
Cushions through the Seal Bar and past the Slitting
Blade. Air Cushions will emerge at the front of the
machine.
Press the
Stop Button
to stop production. The
machine is factory set in continuous mode, and will
create Air Cushions until the Film Roll is empty. To
create a fixed length of Air Cushions, use the
Length
Control
buttons (next page).
F
rdy