27
Maintenance Of Your Multi-Tip System
1.
Remove bolt and tap behind tooth
with a small hammer. Avoid hitting tips.
Use safety goggles.
2.
The keeper plate and tooth can be
separated once out of the slot.
Check the groove in the top of the
keeper plate and the edges
underneath that locate with the
tooth. If these are damaged, replace.
Congratulations for purchasing your
Multi-Tip stump grinding cutting system.
Please look after this system as set
out below to insure a long and trouble free
life span of the wheel and the components.
Safety is paramount. Please take note of
all the enclosed recommendations and
safety notes overleaf.
Tip
-
The leading teeth that are furthest
from the centre of the wheel do most of the
cutting.
By changing these as soon as they become blunt,
you can re-use them in non-leading positions.
