10
SAFE AREA.
Maintain the 20 metre exclusion zone as a safe working area around yourself and the stump
grinder. Keep this area clear from debris build up. Mark the area out with hazard tape. Keep
the area clear of animals as well as people.
KEEP CLEAR.
All operatives must keep well away from the cutter when the engine is running.
STARTING.
Always start the engine in the open air and allow to warm before operating.
Never operate the starter key for more than fifteen seconds at one time.
Sync remote or open rear cabinet door for remote control machines to start.
EMERGENCY STOPPING.
Push the RED STOP button and turn the ignition key to the off position.
SAFE USE.
Prior to starting cutter ensure the front control panel is rotated and securely located into its
position for cutter control. Ensure cutter guards are fitted, secure and intact.
With the engine switched off visually inspect the cutter wheel and ensure that there is no
obvious damage to the cutting teeth, that all teeth retaining bolts are tight and that there is no
debris trapped in the cutting teeth. Under no circumstances must the engine be running or the
ignition key be in the ignition switch whilst you carry out this inspection.
ALWAYS ENSURE THAT THE CUTTER ARM IS IN THE UP POSITION AND CLEAR OF
ANY OBSTACLES BEFORE TRYING TO DRIVE THE MACHINE OR BEFORE SELECTING
THE CUTTER.
HAZARDOUS BRASH.
Some species of trees and bushes are poisonous and can irritate the skin or give respiratory
problems. DO NOT work in confined areas and if in doubt wear a respiratory mask in addition
to the P.P.E already described. Seek professional advice if you are unsure what you are
dealing with.
DUST
If the ground is very dry, a large amount of airborne dust might occur. In this situation a
respiratory mask should be worn.
P.P.E.
