Precor TRM10/GEN06, Руководство по обслуживанию

Страница: 87 / 149

© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law Page 85
Replacing the Input Module
1
Set the treadmill circuit breaker in the off position and unplug the
treadmill’s line cord from the AC outlet.
2
Remove the treadmill’s hood.
3
Remove the two screws that fasten the AC input panel to the frame.
Figure 25: AC Input Panel
4
Lift the AC input panel from the frame and rotate it to expose the AC
line cord clamp screws and input module screws.
Figure 26: AC Input Panel Hardware
5
Remove the hardware that retains the AC line cord clamp and remove the
clamp.
6
Disconnect the AC line cord from the input module.
7
Disconnect the wiring from the input module (1 blue wire, 1 brown wire
and 1 green/yellow wire).
8
Remove the hardware that retains the input module and remove the input
module.