Precor Experience 800 EFX, Руководство по началу работы

Страница: 13 / 34

11
To install yoke cover and shelf:
1. Attach the yoke cover to the back of the base mount using two screws (see Figure 10).
Note
Make sure the small latches engage with the side covers.
2. Fully tighten fasteners (torque for = 300 in-lbs, 34 N-m).
3. Position the shelf in to the tabs near the top of the yoke cover then, secure the anchors over the bar using two screws .
Figure 10
4. Push the front cover onto the front of the base mount all the way in, and with your fingers, press the arrows on either side of the cover (see Figure 11).
Figure 11