Precor Experience 800 EFX, Руководство по началу работы

Страница: 5 / 34

3
800 Line EFX® Assembly Guide
Follow the steps in the order listed in this assembly guide. For more product
information, visit us at www.precor.com.
WARNING At least two people are required to assemble the equipment. DO
NOT attempt assembly by yourself.
Assembly requirements
Important Before you fully tighten a fastener, check that its head is flush with the
surface of the equipment. If not, cross-threading may have occurred. DO NOT attempt
to rework the assembly as more damage to the equipment will occur. Instead, contact
Customer Support at www.precor.com
We recommend you:
•
Assemble the equipment close to where you plan to use it.
•
Assemble the equipment on a solid, flat surface, so that it remains level
and stable.
•
Locate the equipment at least 19.7 inches (0.5 meter) away from walls or
furniture on either side of the equipment, and 19.7 inches (0.5 meter)
away from objects behind or in front of the equipment.
•
DO NOT move the equipment without assistance.
Torque measurements
•
Display bolts 180 in-lbs (20 N-m)
•
Links 300 in-lbs (34 N-m)
•
Set screws 300 in-lbs (34 N-m)
•
Plastite screws 20 in-lbs (3.4 N-m)
Figure 1