Precor Experience 800 EFX, Руководство по началу работы

Страница: 18 / 34

Cardio Equipment Quick Reference Maintenance Guide
For
complete
maintenance and cleaning information, visit us at www.precor.com . For torque settings, review the product Assembly Guide included with your equipment, or go
to www.precor.com for more information.
Important
The owner is responsible for maintaining Precor equipment in their facility based on the recommendations below and any accompanying material.
Weekly Maintenance Tasks
Cleaning procedures
Use a lint-free cloth dampened with water or an approved cleaner in the procedures below.
•
Clean the floor under the equipment. DO NOT lift and hold equipment while vacuuming. When the floor is completely dry, restore power and return the
equipment to its level position.
•
Clean all surfaces of the frame and plastic components. Keep excess moisture away from electronic components to prevent electrical shock or damage, and
dry completely.
•
Use a soft nylon scrub brush to clean grooves and textured surfaces on foot contact locations.
•
On LCD- or PVS- equipped equipment, clean the screen using only a diluted solution of one part 91% isopropyl alcohol to one part water on a damped, lint-free cloth.
Dry completely.
•
For elliptical and treadmill only Clean debris from all wheels (for treadmill and elliptical) and CrossRamp® (for elliptical). Dry completely.
Other weekly maintenance tasks for all equipment
•
Unplug the power cords from any equipment or entertainment devices plugged into a wall outlet. For treadmill: Turn off the circuit breaker.
•
Verify all equipment feet sit squarely on the floor, and adjust if necessary to ensure the equipment does not wobble.
•
Verify that the power cords are not damaged or pinched.
•
Plug in the equipment, turn it on, and verify the following features are performing properly:

Handheld Heart Rate (HHHR)

Incline, Speed, and Resistance controls
•
Elliptical only

Elevate the equipment to its maximum incline.

Clean the ramp (no disassembly required). Debris build-up will shorten the life of the product.
•
Treadmill only

Verify the safety lanyard works.

Emergency Stop Button

Elevate the equipment to its maximum incline.

Follow the procedures, Check the a lignment of the running belt and Adjust the running belt , in this Guide.
4