C932, C932i, C934, C936i Treadmill
Page 7
32. The display will scroll
KEYBOARD TEST
. The display will have a representation of every
key on the keyboard including the
STOP
key. Press each key on the keyboard to ensure that
all keys are functioning normally. Tug on the safety key lanyard, to ensure that the
STOP
key will activate.
33. Press and hold either the
RESET
or
SELECT
key to continue to the heart rate test.
34. The display will scroll
HEART RATE TEST.
The heart rate test will display the heart rate
being received during this test from either a chest strap transmitter or test transmitter. The
display will show the polar filtered heart rate as
P: XX
. Press the
SELECT
key to toggle the
display to the unfiltered heart rate (
U: XX
) and filtered heart rate (
F: XX
).
35. Press either the
RESET
or
SELECT
key to continue to the lift test.
36. The display will scroll
LIFT TEST.
The lift A/D (analog to digital) number will be displayed.
The A/D number is a numerical representation of the physical lift position. As you operate
the lift the A/D number will increment and track the lift position. The A/D number will be used
in a later in this service manual to calibrate the lift.
37. Press the
SELECT
key to toggle the display to the incline% that corresponds to the current
A/D number.
38. Press either the
RESET
or
SELECT
key to continue to the belt speed test.
39. The display will scroll
BELT SPEED TEST.
The belt speed will be controlled during this test
test by the
SPEED
and
SPEED
keys. The belt speed will be displayed.
40. This test is valuable in diagnosing treadmill load conditions such as running bed and/or
running belt condition. As load is increased, the speed is kept at a constant value (as set via
the
SPEED
keys) and the current and power bits will vary proportionately to the load.
41. Press the
SELECT
key to toggle the display to power bits and time.
42. It is suggested that you perform this test on a treadmill known to be in excellent operating
condition. Note the values displayed at a fixed speed (such as 3 M.P.H.) and your body
weight. Those values may then be used to benchmark the operation of treadmills you are
diagnosing
43. Press either the
RESET
or
SELECT
key to continue to the belt power test.
44. Display will scroll
BELT POWER TEST
. The belt power (power bits) will be controlled during
this test by the
SPEED
and
SPEED
keys. The power bits will be displayed.
45. This test is valuable in diagnosing treadmill response to load conditions. As load is
increased, the power bits are kept at a constant value (as set via the
SPEED
keys) and the
current and belt speed will vary proportionately to the load.
46. Press the
SELECT
key to display the belt speed (in M.P.H.) and time.
Содержание C932
Страница 38: ...C932 C932i C934 C936i Treadmilll Page 38 16 Check treadmill operation per Procedure 3...
Страница 40: ...C932 C932i C934 C936i Treadmilll Page 40 9 Check treadmill operation per Section 3...
Страница 49: ...C932 C932i C934 C936i Treadmill Page 49 Block Diagram 7 2 C932 C932i C934 C936i...
