Precor C932, Руководство по обслуживанию

Страница: 10 / 49

C932, C932i, C934, C936i Treadmilll
Page 10
15. The errors will be displayed as; 1: ERXX
16. The arrows keys will allow you to scroll through the log.
17. When the QUICK START key is held for 2 seconds the message CLEAR? will be displayed.
If the QUICK START key is held for an additional 2 seconds, the message OK will be
displayed. When the QUICK START key is released the message NO MORE ERRORS will
be displayed and all error are erased from the log.
18. Press the RESET the ENTER key to exit the information display.
19. The display will scroll MILES: XXXX. This display will indicated the total number of miles
logged on the treadmill.
Note: The odometer data is stored in non-volatile memory on the upper PCA. If the upper PCA
is replaced the odometer data will be lost.
20. Press either the RESET or SELECT key.
21. The display will scroll HOURS: XX . The display will indicate the total number of hours of
use.
22. Press either the RESET or SELECT key.
23. The display will scroll UPPER SW: VER X.XX LOWER SW: VER X.XX. The display will
indicate the currently installed upper and lower software versions.
24. Press either the RESET or SELECT key.
25. If the error log is empty, the display will scroll NO ERRORS. If there are errors in the error
log the display will scroll the first (most recent) error as: 1: ERXX at XXXX MILES XX
HOURS .
26. The keys will move you forward and backward through the error log entries. When the
last entry has been displayed the display will scroll NO MORE ERRORS .
27. If you wish to clear all errors from the error log, press and hold the QUICK START key. The
display will scroll HOLD QUICK START TO CLEAR ERROR LOG . OK will be displayed
when the error log has been cleared.
28. Press either the RESET or SELECT key to exit the information display.