C542i Elliptical Fitness Crosstrainer
Page 64
7.
Set the replace mounting bracket at its mounting position on the frame. Fasten the ramp
mounting bracket with the hardware removed in step 6, slide the wave washer onto the bolt
and then the shim. Torque the bolts to 40 ft./lbs.
8.
Slide the ramp onto the lift yoke and set it at its mounting position on the ramp mounting
bracket.
9.
Replace and torque the four bolts that fasten the ramp to the rear ramp bracket to 12 ft./lbs.
10. Apply a coat of blue loctite to the lift yoke bolts. Replace and tighten the lift yoke bolts.
11. Rotate both stairarms forward so that they are resting on the ramp.
12. Replace the front, top, left and right cover sections per Procedure 7.14.
13. Check unit operation as described in Section Four.
