Precision Power DEQ.8, Руководство пользователя

Страница: 14 / 14

www.precisionpower.com / For more info please contact tech@precisionpower.com Features and Specifications are subject to
change
P 14
4 Troubleshooting
The following symptoms were found to be the most likely cause of issues.
Item#
Symptoms Troubleshooting recommendation If not solved go to item
1 No audio on outputs - Make sure that audio signal is shown on the RMS input
meters.
- Double check that input & output mute buttons are not
enabled
- Confirm that master mute is not enabled
- Confirm that you are synchronized and live
- Click “Restore to Factory default” while connected
3
2 No audio on RMS input
meters
- Check your connectivity
- Double check the strength of your input signal.
- Confirm that master mute is disabled
10
3 Audio on input RMS
meters but no audio on
outputs - Make sure the matrix mixer is set to send audio to the output
channels in a mixer plug-in
- Check the output mute status for each channel 10
4 Cannot reload
configuration - Confirm the file format of your file (.xml)
- Confirm the version of the file 10
5 Cannot connect to the
board - If using external DC supply, try connecting the board with
USB power only 10
6 Cannot install software - Confirm that you installed the required frameworks (Adobe
Air/ Microsoft .net / SP2 XP)
10
10 Problem unsolved by
above suggestions - Have a look at our forums to see if someone else already
had this issue.
- Send us an email (tech@soundstream.com) with a clear
explanation of the symptoms and descriptions of the
troubleshooting steps you already performed
n/a
Please visit precisionpower.com/deq8