Precision matthews PM-1440GS, Руководство пользователя

Страница: 23 / 54

23
Copyright © 2020 Quality Machine Tools, LLC PM-1440GS v3 2020-10
SADDLE FEED GEARBOX DRAIN & REFILL
Make a card-stock Vee channel as described for draining the
headstock. Remove the gearbox fill plug, Figure 4-3. Remove
the gearbox front panel to expose the drain plug, Figure 4-4.
Run the lathe for a few minutes to warm the oil if necessary.
With the Vee channel in place, remove drain plug and allow the
gearbox to empty completely. Replace the drain plug. To refill
the gearbox use a funnel attached to a flexible plastic tube in -
serted into the fill hole. Add oil to the halfway mark on the sight
glass (about 2 qts).
APRON GEARBOX DRAIN & REFILL
Remove the fill plug, Figure 4-4. Remove th e drain plug, and
allow the apron to empty completely. Replace the drain plug.
Add oil to the halfway mark on the sight glass (about 1 qt).
Figure 4-4 Apron gearbox fill plug, drain & sight glass
Figure 4-6 Saddle, cross slide and compound oilers
Figure 4-3 Saddle feed gearbox fill plug
Figure 4-3 Saddle feed gearbox sight glass & drain plug
Cover plate removed
Drain
plug
Sight
glass