21
PM-1030V v5 2020-10
Copyright © 2020 Quality Machine Tools, LLC
LUBRICATION — APRON DRAIN & REFILL
1.
Remove the apron fill plug, Figure 4-3.
2. Locate the drain plug on the underside of the apron casting.
3. Place a drain pan below the drain plug, then remove the
plug.
4. Allow the oil to drain completely, then replace the drain
plug.
5. Using a funnel and tubing assembly as described above for
the gearbox, add an ounce or two of oil.
6.
When satisfied that the gearbox is oil-tight, add oil to the
halfway mark on the sight glass (about 1 pint).
7.
Replace the fill plug.
Figure 4-3
Apron fill plug
& sight glass
LUBRICATION — OILERS
Figure 4-4
Saddle & cross-slide oilers
Figure 4-5
Compound oilers
Figure 4-6
Tailstock oilers
Figure 4-7
Leadscrew oiler