PD6700-0L1 Field-Mount Loop-Powered Process Meter
Instruction Manual
16
Advanced Features Menu &
Display Messages
The following table shows the
Advanced
features
menu functions and messages in the order they
appear in the menu.
Display
Parameter
Action/Setting
OUTPUT
Output
Enter output menu
OFF
Off
Disable output
ALARM
Alarm Output
Enter alarm output
menu
LEVEL
Level Alarm
Assign alarm output to
level
SET
Set Point
Set alarm set point
RESET
Reset Point
Set alarm reset point
VOLUME
Volume Alarm
Assign alarm output to
volume
FILTER
Filter
Set noise filter
LO
Filter Low
Set noise filter to low
setting
mED
Filter Medium
Set noise filter to
medium setting
HI
Filter High
Set noise filter to high
setting
OFF
Filter Off
Disable noise filter
VOLSCAL
Volume Scale
Scale the volume
display
vOl
DECIMAL
Volume
Decimal
Set the decimal position
for volume scaling
NO PTS
Number of
Points
Set the number of
points for volume
scaling
INPUT 1
Input 1
Set volume input 1 on
the level display
DSPLY 1
Display 1
Set volume display 1
INPUT 2
Input 2
Set volume input 2 on
the level display
DSPLY 2
Display 2
Set volume display 2
Display
Parameter
Action/Setting
SAVE ?
Save
Save entered volume
scale parameters
LVL CAL
Level
Calibration
Calibrate the level
display
INPUT 1
Input 1
Calibrate input 1 value
DSPLY 1
Display 1
Set display 1 feet and
inches
INPUT 2
Input 2
Calibrate input 2 value
DSPLY 2
Display 2
Set display 2 feet and
inches
SAVE ?
Save
Save entered calibration
parameters
ICAL
Internal
Calibration
Enter internal reference
calibration
4.000
4.000 mA
Calibrate input at 4 mA
20.000
20.000 mA
Calibrate input at 20 mA
SPN ERR
Span Error
Error with calibration
point 1 and 2 span
MULTIPT
Multipoint
Set level display
multipoint linearization
DISABLE
Disable
Disable multipoint
linearization
ENABLE
Enable
Enable multipoint
linearization
INFO
Meter
Information
Show software number
and version, or reset to
factory defaults
SOFT
Software
Software number
ver
Software
Version
Software version
DFALTS?
Reset to
Defaults?
Restore factory default
parameter settings
