– 12 –
MENU FUNCTIONS
Step 3:
press ENTER. The current setting (ENAB or dISAB)
will be displayed.
Step 4:
Press the
(up arrow key) or
(down arrow
key) on the keypad to select a setting.
Step 5:
Press ENTER To finalize the setting.
GRAPH:
This option allows the user to change the bar-
graph on the gauge display to correspond to any desired
pressure within the pressure limits of the gauge. This
option is useful when identifying a select portion of the
full-scale range of the gauge. The default setting for the
GRAPH is zero and full-scale pressure. For compound
gauges, the default setting for zero is set at full-scale vacu-
um. Full-scale pressure is set at the positive pressure as
displayed on the gauge keypad.
For gauges supplied with the 4-20mA output option, the
default is 4mA equals 0% of the bargraph and 20 mA
equals 100% of the bargraph.
Changing the bargraph to a pressure other than 0 and
100% of range will also change the 4-20mA output to cor-
respond with the new Bargraph pressures for 0 and 100%
.
To use GRAPH option:
Step 1:
Press the MENU key.
Step 2:
Press the
(up arrow key) or
(down arrow key)
on the keypad until the word until the word GRAPH appears.
Step 3:
Press ENTER . The gauge display will indicate the
set full scale pressure range setting on the top line. The
middle line indicates the bargraph at 100% of full-scale.
The bottom line of the display will indicate SETFS to set
the full-scale range as displayed by the bargraph and
4-20mA.
Step 4:
Press the
(up arrow key) or
(down arrow key)
on the keypad to increase or decrease gauge value at
100% of range.
*Indicates default.
I&M008-10136-DIG PDC 7-05_layput 8/4/11 2:42 PM Page 12
