PD2-6100
Large Display Strain Gauge Meter Instruction Manual
5
Specifications
Except where noted all specifications apply to operation at +25°C.
General
Display
Main display: 1.8" (46 mm) high, red
LEDs
6 digits per line (-99999 to 999999), with
lead zero blanking
Display
Intensity
Eight user selectable intensity levels
Display
Update Rate
5/second (200 ms)
Overrange
Display flashes
999999
Underrange
Display flashes
-99999
Display
Assignment
Line 1 and line 2 may be assigned to
PV1, PV2, PCT, d r-u, d gross, d nt-g,
max/min, max & min, set points, units
(line 2 only), or Modbus input.
Units
lb, kg, ounce, gram, ton, metric ton
(tonne), custom units.
Programming
Methods
Four programming buttons, digital inputs,
PC and MeterView Pro software, or
Modbus registers.
Noise Filter
Programmable from 2 to 199 (0 will
disable filter)
Filter Bypass
Programmable from 0.1 to 99.9% of
calibrated span
Rounding
Select 1, 2, 5, 10, 20, 50, or 100
(e.g. rounding = 10, value = 123.45,
display = 123.50).
Recalibration
All ranges are calibrated at the factory.
Recalibration is recommended at least
every 12 months.
Max/Min
Display
Max/min readings reached by the process
are stored until reset by the user or until
power to the meter is turned off.
Password
Three programmable passwords restrict
modification of programmed settings.
Pass 1: Allows use of function keys and digital inputs
Pass 2: Allows use of function keys, digital inputs and
editing set/reset points
Pass 3: Restricts all programming, function keys, and
digital inputs.
Power Options
85-265 VAC 50/60 Hz, 90-265 VDC, 20
W max
or
12-24 VDC
10%, 15 W max
Powered over USB for configuration only.
Isolated
Sensor Power
Supply
Terminals EX+ & EX-: 5 VDC or 10 VDC
10%, rated @ 350 mA max
Note: Do not use 24 VDC to power strain
gauge bridge.
Non-Volatile
Memory
All programmed settings are stored in
non-volatile memory for a minimum of ten
years if power is lost.
Fuse
Required external fuse: UL Recognized, 5
A max, slow blow; up to 6 meters may
share one 5 A fuse
Normal Mode
Rejection
Greater than 60 dB at 50/60 Hz
Isolation
4 kV input/output-to-power line
500 V input-to-output or output-to-P+
supply
Overvoltage
Category
Installation Overvoltage Category II:
Local level with smaller transient
overvoltages than Installation
Overvoltage Category III.
Environmental
Operating temperature range: -40 to
150°F (-40 to 65°C)
Storage temperature range: -40 to 185°F
(-40 to 85°C)
Relative humidity: 0 to 90% non-
condensing
Connections
Removable and integrated screw terminal
blocks accept 12 to 22 AWG wire.
Enclosure
UL Type 4X, IP65 rated. Polycarbonate &
glass blended plastic case, color: gray.
Includes four PG11 through-hole conduit
openings, with two factory installed PG11,
IP68, black nylon threaded hole plugs
with backing nuts.
Mounting
Wall Mounting:
Four (4) mounting holes
provided for screwing meter into wall. See
Wall Mounting Instructions on page 9 for
additional details.
Pipe Mounting:
Optional pipe mounting
kit (PDA6260) allows for pipe mounting.
Sold separately. See Pipe Mounting
Instructions on page 10 for additional
details.
Tightening
Torque
Removable Screw Terminals:
5 lb-in
(0.56 Nm)
Digital I/O and RS485 Terminals:
2.2 lb-
in (0.25 Nm)
Overall
Dimensions
10.63" x 12.59" x 4.77" (270 mm x 319.7
mm x 121.2 mm) (W x H x D)
Weight
6.10 lbs (2.76 kg)
Warranty
3 years parts & labor
Strain Gauge Input
Inputs
Field selectable: 0-15, 0-30, 0-150, 0-300
mV, ±15, ±25, ±150, ±250 mV, or Modbus
PV (Slave)
Accuracy
±0.03% of calibrated span ±1 count
Minimum
Load
Resistance
14 Ω @ 5 V
28 Ω @ 10 V
Maximum
Excitation
Current
350 mA @ 5 V or 10 V
Temperature
Drift
0.002% of calibrated span/
C max from 0
to 65
C ambient,
0.005% of calibrated span/
C max from -
30 to 0
C ambient
Functions
Linear with multi-point linearization
Multi-Point
Linearization
2 to 32 points for PV or PV1,
2 to 8 points for PV2 (Dual-scale feature)
www.
GlobalTestSupply
.com
Find Quality Products Online at:
