PD6830X Explosion-Proof Modbus Scanners
Instruction Manual
29
Scale Modbus PV to Engineering Units (
SCALE
)
The Modbus PVs may be scaled to reflect different engineering units than the data read out of the Modbus slave
device register. To do this, use the
Scale
menu to select the type of scale desired.
Note 1: The bottom display of the feet and inches display models does not show decimal points. While the decimal
point may not appear, it is included on the factor programming steps.
For example: To enter a conversion factor of 2.54, select a factor decimal point with 2 decimal locations, and enter a
factor value of 254.
Note 2:
MP-SCAL
is only available when scaling PV1.
Temporary Display
Will display current value
on bottom display
Temporary Display
Will display current value
on bottom display
Temporary Display
Will display current value
on bottom display
Temporary Display
Will display current value
on bottom display
Temporary Display
Will display current value
on bottom display
Temporary Display
Will display current value
on bottom display